The customer thought inert material screening would be perfect for putting the Warrior 600 to the test as the wet, sticky nature of this recycled material is difficult to screen.
Material was collected from the waste site and transported via an 18 ton dumper lorry to the test site. The manager on site estimated between 30-40 lorry loads of material were delivered to the site during a full day of running a Powerscreen Warrior. At this site in Northern Ireland, a Powerscreen Warrior 600 crushed inert material waste which was fed by an excavator.
Top Deck: 75mm Fingers
Bottom Deck: 25mm Fingers
Running 9-10 hours per day
Slow Feeder due to ‘stickyness’ of material
Fuel Consumption: Approx 6 litres/hour
During this 9-10 hour day, the Powerscreen Warrior used approx 60 Litres of fuel.