At a sand and gravel deposit site in England, the 1150 Maxtrak cone crusher was working at a 20mm CSS. Crushed material (10-70mm) was then fed into a 3-deck vibrating screener.
- Set at 20mm CSS
- Engine Load: 80-85%
- Short throw
- Medium coarse liners
- CSS : 20mm
- The feed material was oversize gravel obtained from the sand wash plant, consisting mostly of sandstone, quartzite and chert.
- Feed size was approximately 10-70mm with very little clay content
- Producing 190-200 tonnes per hour
- 100% passing at 75mm
The customer was very pleased with the 1150 Maxtrak and later purchased one for his quarry.