Introduction
The Powerscreen® Powerscrub range takes washing one step further by providing high speed scrubbing of heavily contaminated material to produce cleaner material at a faster rate.
The Powerscrub range is designed with a trough and two axles with interchangeable blades and paddles which intensively mix the material. Friction from this process breaks down feed contaminates and allows scrubbed material to be stockpiled.
Features & Benefits
- Output potential up to 200 tph (220 US tph)
- Heavy duty robust construction
- 2 high output electrical motors power the inclined rotating shafts to rigorously scrub the material
- Material bed in the hull prevents wear in the steel trough
- Low water consumption
- Remote greasing to all bearings
- Interchangeable high tensile blades
- Water flushed lower bearings prevent wear or damage from small particles
- Elevated spray bar, constantly add's water to the material
- Agitation encourages light particles, slits and clays to float through the water exit
- Rubber lined input chute
- Safety flow-forge panel's over shafts
- Lifting points attached to sides of hull for carriage
Options
- Galvanised structure
- Modular mat fitted to discharge chute with two spray bars and catchbox
- Static or mobile
- Walkways on either side
- Polyurethane screen and catch box at discharge end
- Sieve mesh fitted in water outlet boxes
- Electrical control panel
- 6m (20") discharge conveyor
Specification Table
| 120 Static | 200 Static | 120 Mobile | |
| Weight (Est) | 8,500kgs (18,700lbs) | 17,000kgs (37, 478lbs) | 15,200kgs (33,000lbs) |
| Working width | 3.1m (10'2") | 3.57m (11'7") | 2.5m (8'2") |
| Working length | 8.12m (26'8") | 9.6m (31'4") | 13.8m (45'2") |
| Working height | 3.35m (11') | 2.92m (9'5") | 4.1m (13'5") |
* All information subject to machine configurations & specifications ordered.
** Powerscreen reserves the right to change specifications without prior notice.
